There are no translations available
Технические характиристики:
- Range of Can Dia - 200D ~ 603D
- Number of tooling set - 2 ~ 8 sets (depend on end size and sheet size)
- Capacity per min - variable 100 ~ 220 strokes
Сравнительные характиристики:
Марка
|
S-B23BH, S-B86A, S-B85A
|
Range of Can Dia.
|
200D ~ 603D
|
Number of tooling set
|
2 ~ 8 sets (depend on end size and sheet size)
|
Capacity per min
|
variable 100 ~ 220 strokes
|
Sheet Size range
|
( 700 ~ 1067 )W x ( 830* ~ 1067 )L mm |
Capacity of press
|
30 / 60 tons.
|
Horse power required X1,Y1,Y2
|
3Kw , 5Kw , 3Kw
|
Main motor for press
|
30 HP x 6P
|
End discharge conveyor
|
1HP x 6P
|
Scrape discharge conveyor
|
1/2 HP x 6P
|
Air compressor motor
|
10HP
|
Area of outer ram
|
1350 x 300 mm
|
Area of inner ram
|
1640 x 200 mm
|
Area of bolster
|
1640 x 300 mm
|
Max. die height of outer ram
|
380mm
|
Max. die height of inner ram
|
510mm
|
Stroke of outer ram
|
60mm
|
Stroke of inner ram
|
80mm
|
Floor Space Overall Height
|
7782L x 4000W x 3155+/- 50H mm
|
Net Weight (approx.)
|
kgs
|
|
|
Описание:
This CNC
sheet feeding press equipped with three axis synchronized movement is
suitable for tin or aluminum end stamping. Reliable linear servo motors
and PLC control system are incorporated. Programmable integrated sheet
take-over system can get precise sheet feeding. Besides, a reliable
Human-Machine-Interface is itroduced as a main control unit for data,
transmission and display. Single crankshaft with double action makes
the cutting bur stay at the inner side of the curl. This can avoid the
scratch on the end seaming panel while ends are piled up during
transportation.
Особенности:
- Human-Machine-Interface (touchable screen) acts as a main control unit.
- Movement orbit generate and download automatically, easy for different end size parameters set up.
- With reliable liner servo motors to reduce the inertia at high speed.
- Each axis movement can be manually checked. Besides, created
movement orbit is confirmed automatically to ensure if it is within the
safety range on each axis.
- Equipped with sensors to detect if the clips certainly clip the sheet.
- Multiple
safety control ; for example, machine stop for low air pressure, lack
of oil , jam at exit. Moreover, safety range detection on each axis is
equipped.
- Equipped with air brake clutch, safe and reliable.
- Tooling with pillar die set can be easily pushed into via rollers buried on bolster.
- Pneumatic cylinders are equipped to lower scrap ejection system and inlet guide plate to easily access the toolings.
- End ejection is controlled by electronic cam adjustment to avoid double punch.
- Bushes on crankshaft are properly lubricated by an automatic recycling oil pump. An oil cooling system is incorporated.
- Four sets of air cushion cylinders located at upper side to balance the weight of rams and toolings.
- Suitable for straight or pre-scrolled tin /aluminum sheet.
|